I want to get an unlocked Palm Pixi Plus from Amazon, however I don't have a data plan. I'm originally from Tmobile. I saw many different ways to activate the Pixi if you don't have a data plan, but I wasn't sure which one was the most accurate and the best way to do it. ![]() (Since I don't have a data plan.) Do you recommend 'bypassing' the Pixi or putting in a sim card that HAS DATA, activate the phone with that sim, and once you finish activating the phone, you put in your original sim card (the one with no data plan) and it's all ready to go? Which way of activating the Pixi would be best if you still want to use all its features (text/call/wifi)? Thanks so much! Do you have this phone? If so, which method did you use? Which is the easiest process?I got my wife a vzw pixi+ and set it up for her w/o data plan. Assuming you have a PC, you need to install WOSQI to access the 'novaterm' and you also need to have java installed on your pc. You need to do the followings: 1. Turn on DEVMODE: Since pixi+ is at 1.4.5., you need to down load the devicetool. Jsjsjs $from $ $webos $- $internals $: a, Switch your pixi + to 'recovery mode' ( remove battery; press & hold 'volume-up-key' and connect usb to pixi+). B, on your PC: run 'java -jar devicetool. Jsjsjs' $to $ $switch $ $to $ ' $DEVMODE $& $quot $. Once pixi+ is in 'devmode', you can follow the following instruction to turn wifi on to activiate your pixi+ thru wifi: Good Luck. I got my wife a vzw pixi+ and set it up for her w/o data plan. Assuming you have a PC, you need to install WOSQI to access the 'novaterm' and you also need to have java installed on your pc. You need to do the followings: 1. Turn on DEVMODE: Since pixi+ is at 1.4.5., you need to down load the devicetool. Jsjsjs $from $ $webos $- $internals $: a, Switch your pixi + to 'recovery mode' ( remove battery; press & hold 'volume-up-key' and connect usb to pixi+). B, on your PC: run 'java -jar devicetool. Jsjsjs' $to $ $switch $ $to $ ' $DEVMODE $& $quot $. Once pixi+ is in 'devmode', you can follow the following instruction to turn wifi on to activiate your pixi+ thru wifi: Good Luck.Was your wife still able to connect to wifi when you did all this stuff? Are there any cons to activating the phone this way? Was your wife still able to connect to wifi when you did all this stuff? Are there any cons to activating the phone this way?Once I turned-on 'devmode' on her Pixi+ and setup wifi, she got internet access on her pixi+. I used the wifi to connect to internet to access/setup palm profile. You want to make sure you turn-off your data. There is no cons for do it that way. I did that for my pre2 vzw ( thru pageplus), pre3 vzw and pre3 att. Feb 27, 2010 I recently changed to the palm pre. I want to give my palm treo 700P to my. That part of the palm no. To activate the phone without the plan. Mar 14, 2010. So does this mean you were able to get Verizon to activate the phone without the data plan or not? If so, please let us know what you did. ![]() ![]() I don't have data plan on any of those devices and I only used wifi when needed. I don't think you'll have a Palm Profile doing this. It'll show up as 'Dr. Skipped First Use', and I assume you won't be able to get apps. After bypassing activation, just remove the flag at '/var/luna/preferences/ran-first-use' with Internalz Pro or a device shell and reboot to get the proper setup sequence.As stated in the link, I did all the following ( once WIFI was setup ) to sign-into my palm profile: 3, Install 'impostah' using WOSQI 4, Delete the 'Account' info using 'impostah' ( this will remove 'Dr.Skip First Use')- 5. Use WOSQI to start a novacomm to access the pre3 directly. 6, Within the new terminal, type in the following: a, cd /var/luna/preferences ( change directory to /. ) b, rm ran-first-use ( remove file ran. ) c, pkill LunaSysMgr. ( kill the Luna to restart/re-initiate your activation. Do you have this phone? If so, which method did you use? Which is the easiest process?i have used both the method and there is no difference dude but my suggestion for u would be to use a sim with data plan because as ur new here once u activate for the first time and read some posts over here. You will learn the tricks and you will find everything easy. One more thing is dont use impostah as u dont know the exact use of it and it works mostly for webos 2.x not for pixi plus. Another clarification is without the palm profile u can make use of all the features of the phone. Only thing u need palm profile is for access to the app catalog.
0 Comments
Ready to activate your phone? Note: If you purchased a phone or SIM card from or T-Mobile.com, it will arrive activated with a Pay As You Go plan with 30 minutes of talk or 30 texts (or any combination of the two that adds up to 30).* To start your service, simply slip your SIM card into your device. Be sure to to this account before your introductory minutes and texts run out. Need more help? For more information about installing your SIM card, making payments, porting in an existing number, or changing to a different plan, see the. * Tourist Plan SIM Kits do not come pre-activated. General Terms: $10 SIM Starter Kit may be required. Sufficient balance required to use service. Domestic use only; additional charges apply for international use. Calls rated on a per-minute basis. Partial minutes rounded up. No data roaming. For up to 180 days after activation, devices purchased and/or activated at certain locations will only work on the T-Mobile network with the SIMs included at activation. Bring Your Own Device: Check your warranty and contract with your carrier to see what conditions apply to unlocking your device. ![]() ![]() New phone or SIM card activation. Go to Activate your wireless device. Do one of the following: AT&T Wireless Device – Select Activate your device. AT&T PREPAIDSM (formerly GoPhone®) – From the drop-down, select your device. Enter any required information. Select Continue. Follow the prompts to complete your activation. Product Description. Apple Sim card will allow you to activate the iPad with Sprint, ATT, and. Att.net News, entertainment & more att.net News. Activate your AT&T PREPAID SM device. Help for SIM number. ![]() Changes to version 6.0.0.299 added since version 6.0.0.300 (Critical Fix 1): 1) EULA files have been fixed. 2) An error that could cause a BSOD while scanning the UP702W32.EXE file on a network drive has been fixed. 3) Caching of information about previous scans for objects on network drives has been removed. 4) Automatic detection of the following third-party applications during product setup has been temporarily disabled: - Symantec Norton AntiVirus 2004 Professional - Symantec Norton AntiVirus 2005 - Norton Internet Security 2005 5) Installation on computers running 64-bit operating systems has been allowed. 64 bit users should be happy. Kaspersky AntiVirus 2017 (17.0.0.611) With Activation Code & Key + Crack Kaspersky AntiVirus 2017 formerly known as AntiViral Toolkit Pro; often referred. Sep 02, 2014 Kaspersky 2015/2016 Activation Code. Activate Kaspersky Internet Security ☔ 2017 For 732 Days License Free With KRT.exe. English Location: United. If I understand/remember what lucianbara and Don have said in the past then one should uninstall (keeping your configuration details when asked if you want to), reboot and then install the new version. What I am not clear about is whether there is any need to install Build 300 if one is not experiencing any issues with Build 299. Or should one do so given all the recent hot fixes? From what I read in the quote on the changes there isn't nothing that is likely to affect me A steer from one of our more learned members would be much appreciated. ![]() An activation code is a unique 20-character combination consisting of four 5-character blocks. It looks like XXXXX- XXXXX-XXXXX-XXXXX An activation code for Kaspersky Lab business products is a very uncommon thing. Usually Kaspersky Lab business products are activated with a key file. You may get an activation code if you have purchased a business product in the Kaspersky e-store. The activation code will be sent to the email address indicated in the buy order. An activation code for a business product can be activated at any time. The license expiration period begins at the moment you activate a product with the given activation code for the first time. It is necessary to have an Internet connection at the moment of activating a corporate product with an activation code. You can always over Internet. It can be useful, for example for installing a corporate product on a computer that does not have an Internet connection. ![]() General requirements: • 300 MB free hard drive space. • Microsoft Internet Explorer 6.0, or higher (for updating application databases and program modules via the Internet). • Microsoft Windows Installer 2.0 or higher. ![]() Minimum configuration depending on operating system: • Microsoft Windows 2000 Professional (Service Pack 4 Rollup1), • Microsoft Windows XP Professional (Service Pack 2 or higher), • Microsoft Windows XP Professional x64 (Service Pack 2 or higher): - Intel Pentium 300 MHz 32-bit (x86) / 64-bit (x64) processor, or higher (or a compatible equivalent). - free 256 MB RAM. • Microsoft Windows Vista Business/Enterprise/Ultimate (Service Pack 1 or higher), • Microsoft Windows Vista Business/Enterprise/Ultimate x64 (Service Pack 1 or higher), • Microsoft Windows 7 Professional/Enterprise/Ultimate, • Microsoft Windows 7 Professional/Enterprise/Ultimate x64: - Intel Pentium 800 MHz 32-bit (x86) / 64-bit (x64) processor, or higher (or a compatible equivalent). - free 512 MB RAM. To display the product's interface optimally it is recommended to use standard screen resolution not less than 800x600 pixels. To install Kaspersky Anti-Virus 6.0 SOS MP4 on Windows Vista/Windows 7 OS, you must disable the option System Restore in system properties. This is required because if you have the option System Restore enabled, the system will need additional 500 MB of free disk space for successful installation of Kaspersky Anti-Virus. Patient Assistance Program » Key Facts and History » Board of. SOLODYN® (minocycline HCI) extended release tablets for oral use, 55 mg, 80 mg or 105 mg. If you are quoted a co-pay that is more than $20 for your SOLODYN Tablets (including prior authorization), call 888-796-3320 (888-Rx-Med 20) for assistance before contacting your physician. Your card is good for up to 3 prescription fills of 55, 65, 80, 105, or 115 mg SOLODYN Tablets within 6 months of activation or until. $9.40 Top drugs • • • • • • • • • • Trending drugs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Saving on prescriptions has never been easier • Step One Find your prescription • Step Two Compare pricing • Step Three Save at the pharmacy SingleCare partners with most pharmacies • CVS • Walmart • Kroger • Walgreens My prescription discounts are fantastic, I filled my allergy meds with SingleCare and it's $6 cheaper than my insurance copay. Compare your copays and save money, it's so easy! Pittsburgh, PA Prescription FAQs. Our pharmacy savings card is accepted nationwide at over 35,000 pharmacies, including CVS, Target, Longs Drugs, Walmart, Kroger, Fry's, Harris Teeter, Walgreens, Duane Reade and many more. Simply bring your SingleCare card to the pharmacy and ask the pharmacist to process your prescription using the BIN and PCN number found on your card. To look up a drug price or to see if your pharmacy accepts SingleCare, search for your prescription at the top of this page. You can also search for your prescription on the SingleCare app, available for both Android and iOS. Why did I receive a prescription savings card? This is a medical discount plan. This is NOT insurance. This program offers you the opportunity to locate providers of various types of medical services who will offer their services to you at discounted rates. The range of discounts for medical or ancillary services provided under the plan will vary depending on the type of provider and service received. ![]() ![]() ![]() You are fully responsible for paying for all health care services but will be entitled to receive a discount from those health care providers in accordance with the specific pre-negotiated discounted fee schedule. This program does not guarantee the quality of the services or procedures offered by the providers. Except for prescription drugs which you will pay directly to the pharmacy at the time of purchase, all other services received through a program provider will be charged to the credit card on file in your member account. The charge will include an administrative fee for use of the program. Towers Administrators Inc. Is the licensed discount medical plan organization with its administrative office located at 4510 Cox Road, Suite 111, Glen Allen, VA 23060. SingleCare Administrators is the marketer of the discount medical plan organization including its website, singlecare.com, with its corporate office located at 4100 Regent Street, Suite S, Columbus, OH 43219. ![]() ![]() For additional information, including an up-to-date list of providers, or assistance with any issue related to program membership, please contact member support any time at www.singlecare.com, or by calling toll-free 844-234-3057, Monday through Friday 9am-9pm EST. Solodyn is prescription oral antibiotic that treats red, pus-filled pimples in patients 12 years of age or older with moderate to severe acne. This medication will only treat certain types of pimples and will not improve whiteheads, blackheads or infected acne cysts under the skin. Available in tablet form, the average price for Solodyn 55mg is around $1,150 for 30 tablets (prices vary by location). If you are unable to afford the Solodyn cost, a coupon is available on our site that can save you money at most US pharmacies. To learn more about Solodyn and the savings offers available, keep reading. • •| • •| • •| • © 2015 Script Relief, LLC. 712 Fifth Avenue, 14th Floor, New York, NY The information on this site does not constitute medical advice and is not intended to be a substitute for proper medical care provided by a physician. This program is not insurance. All Rights Reserved. Designated trademarks and brands are the properties of their respective owners. Pharmacy names, logos, brands, and other trademarks are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them. Imagine you have a Windows PC with a single user account, and you just lost your password. Here’s how to enable the hidden Administrator account with nothing more than the install CD and some registry hacking magic so you can reset your password. Normally if you wanted to, you’d need access to an Administrator mode command prompt, but that won’t work if you don’t have access, right? This is a great way to quickly enable the hidden admin account so you can reset the password on your main account. Note: This will require editing the registry which is risky. Proceed only if you know what you are doing and at your own risk. Enabling the Hidden Administrator Account Now prepare your Windows 7/Vista DVD and restart the computer with the DVD in the DVD Drive—you’ll want to boot from the DVD so you may need to change the boot order in the BIOS. Depending on your system you will need to press Del, F2, or F12. After you’ve successfully booted from the DVD you’ll be presented with the language setting of the Windows setup. ![]() In the next screen click “Repair your computer” from the bottom left corner of the window. Now the setup will search for Windows installations then display them, choose the Windows you want and click next. The setup may try to search for problems and may ask you if you want to restore your computer, just click no. Finally you’ll arrive at the System Recovery Options window that looks like this: Click Command Prompt. This will open up a command prompt window where you’ll have to type “regedit” and press enter. From this point on you have to be extra careful as one mistake might ruin your Windows and render it unusable. In the left side of the Registry Editor click “HKEY_LOCAL_MACHINE” then in File menu click “Load Hive”. In the file name field type the following and hit enter.%windir% system32 config SAM The hive needs a name, give it a name and remember it. For the purpose of this article we will name it “test” so replace it with the name you chose for the next steps. What you just did is load the SAM file into the Registry Editor so we can edit it. The SAM file is the Security Accounts Manager and contains encrypted information about the account names and passwords. Now that it’s loaded into the registry, navigate to “HKEY_LOCAL_MACHINE test SAM Domains Account Users”. Click on “000001F4” and from the right side pane double-click the “F” entry. A new window will open allowing you to edit the “F” entry. The line that starts with “0038” is what you want to edit. The value next to “0038” is “11”, replace it with “10”. ![]() Be careful not to change anything else. Just double click the “11” and type “10” then hit the OK button. “11” is for disabled and “10” for enabled. Back in the Registry Editor, from the left side click on the name you gave to the hive you loaded earlier and click “Unload Hive” from the File menu, restart the computer and you are done. No admin account in windows 7 safe mode and cannot access guest. User-Admin account registry/profile got. You enable a disabled Admin Account in Windows 7? Enable Desktop Background. Login to the VCL reservation as Administrator; Configure Windows Explorer to. Windows 7 only allows its built-in profile copying. In this instructable i will show you guys how one can enable Administrator Account in Windows 7 The administrator account is a hidden, disabled and built-in. Jun 26, 2015. Across Windows 7, 8.1, and 10, there are up to three ways that you can enable (and disable) the Windows Administrator account. They're all equally effective, but the command prompt method is the only one that's guaranteed to be available on your version of Windows. Go with whichever option works best. If I disable the Administrator account will the settings go back to default or will any changes made remain after the disable? The Administrator account is now enabled. Have a question or a suggestion? Sound off in the comments. In this instructable i will show you guys how one can enable Administrator Account in Windows 7 The administrator account is a hidden, disabled and built-in account with Windows 7/Vista/xp. But a user can enable this account for some special actions. Such as troubleshooting, installing harmful software or some special networking tasks. By default, most of the user accounts are a part/member of the Administrator account. Others are standard accounts without being any part of an administrator account. Windows disabled this account to prevent malicious programs and harmful activities on the system. So any special task of system needs administrative privilege and the annoying UAC (User Account Control) bar will pop up for the users, except the administrator account. This instructable will show you how to enable Administrator account in three easy ways. Choose only one method from below to activate administrator account. Step 1: Method #1. Using Command Prompt. Type secpol.msc in start menu and run it as administrator. From this Local Security Policies, expand the security options under the Local Policies. Find 'Account: Administrator account status' from the right pane. Open the 'Account: Administrator account status' and choose Enabled to enable it. You can also disable it from here. After completing any of above processes, reboot your PC or log off. Now you will see a new account 'Administrator' which has no password by default. Log in to this account and enjoy the real administrator power of your PC. If you get the issue whereby it wont let you run because it needs a password, try the following. It worked for me. Restart the computer in safe mode with command prompt (via the boot manager, f1 in my case then f8 for options), log into your original admin account (no password needed in this mode) then enter 'net user administrator /active:yes'. Now you can restart your pc and it should be there. Hope this helps anyone that has come to this page with the same issue I have had (corrupt user profile). After i entered CMD in admin and typed in the following line. CMD said that it was fine and didn't require any further work. But when i relog or restart my PC to see if it worked. I can still see the administrator account along with my own 'Administrator' account. I've built my PC by myself and it didn't show at first when i rebooted my PC. But then i wanted to create two account on a project i was working on to see if it could handle a multi source. After i then wanted to remove the account it kept saying the same everytime i typed in the command in CMD. I've been trying to see if the other two methods are working. But I can't find the.msc file when i search. And i can't find the administrative account in section two? Any other solutions i can't even hide the account anymore oh might be a good idea to tell. Working on a Win7 Kind regards. ************************************************** *Adobe Creative Suite 4 Keygen & Activation Patch* ************************************************** Ok, here is an activation fix for Adobe. It should be used after first installing any CS4 products as that is when it will try to activate. Basically this adds a list of known activation servers to the 'HOSTS' file stopping activation from taking place and a.dll that stops licence expirery. Installation Instructions ------------------------- 1) Disconnect from the internet 2) Install your CS4 suite or software using the trial option. 3) Finish installing and DO NOT register. 4) Run the 'Activation Blocker.bat' file (run as administrator in Vista). 5) Copy the file 'amtlib.dll' into the install directory overwriting the exsisting file. After Effects Cs4 Keygen after effects cs4 keygen How can the answer be improved?Smart-Serials - Serials for Adobe After Effects. Lost the serial number to your Adobe CS suite or individual program? How Do I Find the Serial Numbers to My Adobe CS Programs? Adobe CS4, and Adobe CS3. Nov 19, 2009. * If you've previously entered a serial, run any Adobe CS4 application, go to the Help menu of it and deactivate. Quit any open Adobe CS4 aplication after deactivation. * Launch any Adobe CS4 application and enter a valid serial. The serial will be permanent and you will be activated your Adobe CS4 Applications. Oct 12, 2017. CS5.5, CS5, and CS4: Activation happens automatically as soon as the software detects an Internet connection, or the software prompts you to activate it during installation. To activate your. Some products require you to enter your serial number or redemption code before you can start using your product. Adobe Cs4 Serial Number Keygen. Adobe cs4 serial number keygen Please input captcha to take your serial number. View in text. Similar activation keys. (You will have to do this multiple times for each installed program in a suite) 6) Run an Adobe program and enter a serial using the keygen. 7) Done:) NOTE - This will not reactivate a product if it has already been shown as 'Licence expired'. To solve that set the date back then deactivate your product (check the box to remove the serial also). Then put the date forward and enter a new serial:). ![]() ![]() ![]() ![]() Jul 02, 2017 How to Activate a Visa Credit Card. WikiHow Account. No account yet? It has a phone number you can call to activate it. ![]() My computer automatically updated Thursday July 10, 2008 and when it rebooted my Vista Home Premium was no longer valid and I was dead in the water. I called Lenovo who gave me a phone number for Microsoft activation. I called that number and they told me that was a technical problem and gave me another number. The third phone call lasted 2 hours and 48 minutes with no resolution. I was not able to activate a new product number due to a problem. What I learned is that there is a specific Lenovo / Microsoft problem and that a bunch of people called in last week. I was the only one who couldn't get restarted. It is now an elevated case with Microsoft and I am to wait for an email for a solution. In the meantime I ran the recovery disks I made a couple of months ago. ![]() ![]() Prior to doing this I called Lenovo and asked if it would overwrite Vista or the whole disk. The person at the other end told me I could choose. It overwrote the whole disk so now I have a loss of data. My computer is working and I did all updates until July 8 and did not do those. I have not heard from Microsoft on the solution and I am TERRIFIED of updating past the above mentioned date. Lenovo chooses not to hear my problem even though my computer is under warranty and Microsoft specified it was a Microsoft/Lenovo problem. To me that says there is a hardware problem. Anyway I am not fond of Microsoft or Lenovo at this time. I've had to send my computer in for work twice and have been awed at the speed of which I got my computer back and the shipping services Lenovo uses. Part of my problems that I was trying to fix was to clean off my hard drive as it was FULL and I was trying to do back ups unsuccessfully and get data cleaned off so my operating system could run more efficiently. Found out that the Lenovo Rescue and Recovery program is the culprit. I can't get it to run a backup to a network drive so still have that problem. Anybody able to give me a warm fuzzy feeling about either Microsoft or Lenovo so that I can begin to trust either? Believe me, you are not the only one fed up and with the EXACT same problem. Mine is Vista Ultimate and happened because of Auto updates on July 9th. I have been working with Microsoft and Lenovo just as you have, have rebuilt my system now 5 times after many hours on the phone. I am comfortable with Rescue & Recovery and did not lose any data as I have an auto backup to an external drive. I have turned off Windows Auto-updates until I hear about a fix from Microsoft or Lenovo. I, too, have no warm fuzzy feelings for either Microsoft or Lenovo, although I will say that they have spent a lot of time with me; however, the problem should NEVER have happened in the first place. It is my second complete crash with my 5 month old Lenovo m57p high end desktop - the last one due to a bad Lenovo Systems Update download file - a known issue that I was one of the first to discover. That one did not involve Microsoft and took 2 weeks to get resolved by Lenovo. I've never even had an apology from them. I have been through the EXACT same scenario on this Vista Validation issue as you and am still waiting. I am promised a call tomorrow. The only thing I have learned from Microsoft is that it was PROBABLY the KB950582 update that caused the problem. It is still listed as a critical update on my Windows Update screen. I did get SP 1 stand alone version successfully installed finally. No you are not alone. Automatic updates happens and one day you need an activation code and the one on the bottom of your laptop doesnt work. After much of the same back and forth nonesense no one at either Lenovo or Microsoft was able to fix the problem. Three days later about 10 hours on the phone with both companies, no one can give the activation code. You end up if you are lucky getting someone at Lenovo who knows how to restore the computer to factory settings (We got lucky enough to get someone who could walk us through it. You lose all your information and files and programs. You have to reinstall everything from day one. I even was told I had to buy a program to resolve this situation. The computer works now but I have shut down automatic updates until Microsoft and Lenovo solve the problem as I can not afford to lose any more information. So no we do not have any warm and fuzzy feelings for either Lenovo or Microsoft. They should own up to the fact that they have an issue and need to work on it. Which is the final answer I received after calling to report an illegal copy of Windows Vista purchased with the Lenovo Laptop last year. Since I don't want to have to reformat again I am leaving the updates off until the resolution occurs. And of course no one will inform me of this I have to keep looking on the websites of Lenovo and Microsoft. And yes I remain notageek. After determining the problem still existed with windows update automatically downloading & installing updates, then getting the 'windows activation error' code - 0xC004E003, using R & R to restore operating system to point (10-01-08 2:00 PM) & reading the post above by SueMag, I can confirm that the problem appears to be update #KB950582. I repeated the same procedure but stopped the system from restarting after installing the same 24 windows updates, uninstalled update KB950582 (which makes since, the release date is 07-08-08 which is about the time the trouble started), restarted the system & it booted up fine. So now I've got update back on, but select installs to make sure it doesn't get back on here, since it is considered an 'important' update. I hope this helps someone else. Call the activation number. When you receive your new credit card in the mail, it should have a sticker on the front that will explain how to activate it by either calling a phone number or going to a website. Locate the number and dial it using your phone. • Ordinarily, the phone number will be a toll-free number, such as an 800 number. • Depending upon your card issuer, you may only be able to call at certain times, such as during regular business hours. • Some card issuers only allow activation by phone. • You may be asked to call and activate your card from a phone number that the card issuer has on file. If you do not or cannot, you may have to speak with a representative from the card issuer to activate the card. This is a security measure to prevent credit card fraud. Answer security questions. When you call to activate your card, you may be asked a series of security questions. Whether a live person or an automated assistant asks you these questions, you will need to answer them (possibly by punching numbers in using your phone’s keypad) in order to activate the card. These security questions will be based on personal information that may include things like: • Your account number • Your PIN number • Your social Security number • Your address • Your date of birth. Visit the card activation website. In many cases, you can now choose to activate your card online. Look for a sticker on the front of the card or an insert that lists a secure website to activate it. Using a computer and internet browser, visit this website. • The website may be hosted by your bank or credit card issuer, or it may be the website of a secure third-party service that it uses. • Avoid visiting credit card activation websites when using unsecure internet connections, such as public wi-fi in coffee shops. It is easier for thieves to access and steal sensitive information like credit card numbers over unsecure connections. Enter the card information requested by the website. The activation website will ask you to enter information related to the card in order to activate it. You may be asked to enter this information in one step or a series of steps. Standard information you may be asked to enter includes: • The number of the new card. This is the sixteen-digit number found on the front of the card. • Your social security number, or its last four digits. • Your account number with the bank or credit institution, if applicable. • The CVV number. This is the three-digit number found on the back of cards issued by Visa and Mastercard. • The zip code of the address associated with the card account. • Your date of birth. Determine if you can activate your card though a personal account. If you have an online account or existing relationship with the institution your card comes from (such as with a bank, credit institution, or retail store), you may be able to activate the card through your account. Check the information mailed to you along with your card to see if this option is available to you. • You may also be able to activate the card on your smartphone or other device via the institution’s mobile banking app, if it has one, and if your credit card is issued by your bank. Check the information mailed to you along with your card to see if this option is listed for you. Visit your account login website. If your card issuer allows you to activate the card through your personal account, use a web browser to go to your account login website. Enter the information you are prompted to (username, account number, password, etc.) in order to access your account. • If you are not sure of the account login website, it should be listed in the information mailed to you along with the credit card. • If you have an existing relationship with the credit card issuer, but do not yet have an online account, follow the directions provided on the website in order to create a username and password and set up your account. • Avoid visiting credit card activation websites when using unsecure internet connections, such as public wi-fi in coffee shops. It is easier for thieves to access and steal sensitive information like credit card numbers over unsecure connections. Activate All Versions Of Windows 8 And Windows Server 2012: full version free software download2/27/2018 Almost 4 months have passed since the official release of Windows 8.1 and Windows Server 2012. All Windows versions from Vista up to Win 8. Activate Windows. It is often a requirement to upgrade OS to full retail version. I will show steps to activate Windows Server 2012 Evaluation to full version. KMSPico v7 is an Offline KMS Activator that emulates a KMS server in the memory of your computer and sends activation data back and forth attempting to activate volume versions of Windows and Office. I have personally activated Windows 8 without having my lan drivers installed. This is the fastest, safest & easiest way for activating Windows & Office Products. How This Program Works: 1. Install KMSPico v7 in Windows. Run automatically KMSELDI and AutoPico. 2.1 Make Tokens Backup. 2.2 Detect VL or Retail and depending of the License Status activate or convert to VL. 2.3 Activate for 180 days all VL products found. Install a windows service that reactive every windows start. Create a task schedule for AutoPico to run every 24 hours. Requirements:.NET 4.0 or Windows 8/2012 Activates: • Windows Vista Business/Enterprise/N/VL • Windows 7 Pro/Enterprise/N/VL • Windows 8/Enterprise/N/VL (For activating Windows 8.1 use ) • Windows Server Std/Data 2008/2008R2/2012 • Office 2010/2013 Recommendations (Optional): - Make exceptions to Directory%ProgramFiles% KMSpico *.exe in Antivirus or Defender. Updated: February 10, 2017 Applies To: Windows 10, Windows 8.1, Windows Server 2012 R2 The first step in planning for Volume Activation services in Windows starting with Windows Server 2012 is to evaluate the features and deployment models that are available for activating client computers. When you understand the differences between and advantages of these features and deployment models, move to and use this information to assess the types of network and clients that you have. Then move to to identify which solution is best for each group of clients. The Volume Activation server role in Windows Server provides three methods for implementing volume activation. You can use one, two, or all three methods of volume activation. The methods you choose will depend on the size, network infrastructure, connectivity, and security requirements of your organization. The following table highlights these methods. Task Description 1.1. Plan for Active Directory-based Activation Identify and resolve key planning issues that are associated with Active Directory-based Activation. Plan for Key Management Services (KMS) activation Identify and resolve key planning issues that are associated with KMS activation. Plan for Multiple Activation Key (MAK) activation Identify and resolve key planning issues that are associated with MAK activation. When you understand your volume activation options, you choose the right combination of methods to meet your organization’s needs. Active Directory-based Activation is a role service that allows you to use Active Directory Domain Services (AD DS) to store activation objects, which can greatly simplify the task of maintaining volume activation services for a network. With Active Directory-based Activation, any computers running operating systems starting with Windows 8 or Windows Server 2012 with a KMS client setup key (GVLK) that are connected to the domain will activate automatically and transparently during computer startup. These clients stay activated as long as they remain members of the domain and maintain periodic contact with a domain controller. Activation takes place after the Software Protection service starts. When the Software Protection service starts, the computer contacts AD DS automatically, receives the activation object, and activates without user intervention. The following are planning considerations when working with Active Directory-based Activation: • With Active Directory-based Activation, you do not need an additional host server; your existing domain controllers can support activation clients, with the following limitations: • Active Directory-based Activation cannot be configured on read-only domain controllers. • Active Directory-based Activation cannot be used with non-Microsoft directory services. • AD DS must be at the Windows Server 2012 schema level to store activation objects. Domain controllers running earlier versions of Windows Server can activate clients after their schemas have been updated using the Windows Server 2012 version of Adprep.exe. ![]() ![]() Windows 8 and Windows Server 2012. Windows requires activation to reduce software piracy and. Important driver updates for the version of Windows that. Mar 29, 2017. Describes an issue in which you may receive an '0xC004E002' error message when you try to activate Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012, Windows 8.1, or Windows Server 2012 R2. For more information, see. Note For Windows Server 2012 R2, you do not have to run Adprep.exe again; the Windows Server 2012 schema level is adequate. • You only need one activation object forest. Note When the client and server KMS host keys are activated within an environment, two activation objects will exist in the forest. In this case, the activation object on the server activates computers running Windows 8 or Windows Server 2012 within the forest and the client activation object is not used. There is no harm in keeping the client activation object, but it can also safely be deleted. • Unlike using KMS, you do not need to meet any threshold limits before clients or servers can be activated. The following are additional planning considerations for Active Directory-based Activation. Using Active Directory-based Activation in mixed Windows activation environments Many organizations have elaborate volume license infrastructures to support KMS and Office installations. To add Active Directory-based Activation to these environments, administrators must assess their current implementations and determine what role Active Directory-based Activation will play in the environment. Some considerations include how to upgrade these operating systems and applications to versions that support Active Directory-based Activation. ![]() For environments that will run Windows 8, Windows Server 2012, or newer client or server operating systems exclusively, Active Directory-based Activation is a suitable option for activating all clients and servers, and you may be able to remove any KMS hosts from your environment. If an environment will continue to contain earlier volume-licensed operating systems and applications, administrators need a KMS host to maintain activation status for earlier volume-licensed editions of Windows and Office in addition to enabling Active Directory-based Activation for Windows 8 and Windows Server 2012 (or newer) clients. Using Active Directory-based Activation failover capability There can also be advantages to maintaining more than one activation method for your environment. To understand why, consider what happens when clients need to be reactivated. The activation status of clients that are joined to the domain and activated with Active Directory-based Activation lasts for 180 days. When a reactivation event occurs on an installation, the client queries AD DS for the activation object. Client systems examine the activation object and compare it to the local edition as defined by the GVLK. ![]() ![]() If the object and GVLK match, reactivation occurs. If the AD DS object is not reachable, clients attempt to use activation methods in the following order: • Active Directory-based Activation • KMS activation • MAK activation If an installation was previously activated, a successful activation event will reset the activation period to 180 days. If an activation attempt fails, activation will be attempted every seven days by default until reactivation is successful. If the full 180-day activation period expires, the activation fails, a notification is displayed to the user, and an event is logged in the Windows Application Event Log. If Active Directory-based Activation is not available, computers that were originally activated by using Active Directory-based Activation attempt to use KMS activation, and they continue to do so until the activation is successful. The next time the computer attempts to reactivate, the client first attempts to use Active Directory-based Activation. If that attempt is successful, the client is again based on Active Directory-based Activation. Computers that are no longer members of a domain will fail activation when the computer or Software Protection service are restarted. The following information outlines initial planning considerations that you need to review for Key Management Services (KMS) activation. KMS uses a client-server model to active clients. KMS clients connect to a KMS server, called the KMS host, for activation. The KMS host must reside on your local network. KMS hosts do not need to be dedicated servers, and KMS can be cohosted with other services. You can run a KMS host on any physical or virtual system that is running Windows 10, Windows Server 2012, Windows 8, Windows Server 2008 R2, Windows Server 2008, Windows 7, or Windows Vista SP1 or SP2. A KMS host running on Windows 8, Windows 7, or Windows Vista can only activate computers running client operating systems. The following table summarizes KMS host and client requirements for networks that include Windows Server 2012 and Windows 8 (or newer) clients. Product key group KMS can be hosted on Note: Updates might be required on the KMS server to support activation of any of these newer clients. If you receive activation errors, check that you have the appropriate updates listed below this table. The following information outlines initial considerations that you need to review for Multiple Activation Key (MAK) activation. MAK is used for a one-time activation with activation services that are hosted by Microsoft. Each MAK key has a predetermined number of allowed activations. This number is based on your volume licensing agreements, and it does not match your organization’s exact license count. Each activation that uses a MAK with activation services that are hosted by Microsoft counts towards the activation limit. A MAK activation is recommended for computers that rarely or never connect to the corporate network and for environments where the number of physical computers that need activation does not meet the KMS activation threshold. Note Computers running Windows 8 or Windows Server 2012 or newer operating systems can be converted from Active Directory-based Activation or KMS activation to MAK activation at any time. For information, see. There are two ways to activate computers by using MAK: • MAK Independent: MAK Independent activation requires that each computer independently connect and activate with Microsoft over the Internet or by telephone. MAK Independent activation is best suited for computers within an organization that do not maintain a connection to the corporate network. • MAK Proxy: MAK Proxy activation enables a centralized activation request on behalf of multiple computers with one connection to Microsoft. MAK Proxy activation is configured by using the Volume Activation Management Tool (VAMT). MAK Proxy activation is appropriate for environments where security concerns can restrict direct access to the Internet or the corporate network. It is also suited for development and test labs that lack this connectivity. Note VAMT is a standalone application that collects activation requests from several systems then sends them, in bulk, to Microsoft. For more information, see. MAK can be used for individual computers or with an image that can be duplicated or provided for download by using Microsoft deployment solutions. MAK can also be used on a computer that was originally configured to use KMS activation, if that computer’s activation is about to or has reached the end of its activation validity interval. How to activate your Roku account in Roku.com/link? • Open up your web browser in your laptop or computer. • Enter the www.roku.com/link in URL. • Once you see the web page, enter the Roku Activation code in it. • If you already have an existing account use that account to activate your device. • If you don’t have, you can create one. • For new users in order to create a new roku.com link account; • Click on “create new account” • Enter your first and last name • After entering your email address, create a password and verify it. This description of how to set up a Roku Video Streamer, will work for every current/recent model, and every future one they are likely to introduce in the near future. (Some older or obsolete models did not use HDMI as the primary style of video connection to convey the video signal to the TV, but the description which follows should be exactly what is needed for 98% of recent model installations. For the older ones; it is simply a matter of seeing which style of video connection is on both your TV and your Roku Streamer.) For Roku setup the streaming player needs 3 things – 2 inputs and 1 output: • Source of Internet (Network) – either wired or wireless • Source of Electrical Power • Output of Video 1) Internet – Wired connection is to be preferred for Roku activation; it is usually faster and is not subject to picking up interference from your neighbor’s wireless system. Some Roku devices have a Wired Internet input; some do not. Roku Stick and Roku Express generally use wireless, so skip the next part about Ethernet cable. If you have these, and you want to use the wired connection, plug the cable into the socket. If you do not, you will use wireless connection (“Wi-Fi”). Several steps from now, the device will show you a list of the wireless networks that it is able to receive a signal from, and you will choose the network you desire to use from the list, and enter the password for the network (if the network has a password; it should, otherwise anyone nearby can use your internet without permission). ![]() New phone or SIM card activation. Go to Activate your wireless device. Do one of the following: AT&T Wireless Device – Select Activate your device. AT&T PREPAIDSM (formerly GoPhone®) – From the drop-down, select your device. Enter any required information. Select Continue. Follow the prompts to complete your activation. Jan 08, 2016 How to Activate an AT&T SIM Card. If you just got your new phone and SIM card from one of the packages offered by AT&T, you will need to activate. 2) Electrical Power – there are two styles of Power for Roku streaming devices. If you have a Roku TV to plug in the main power to the TV and the Roku streaming system inside the TV will automatically receive power also, and you can skip to step 3. For streaming devices: a) Wall Transformer that does not use USB – if your transformer has a non-detachable cord and looks somewhat like the following. Other end may have a right angle like the other end of the Express cable, but with a round plug instead of the pictured trapezoidal plug. So, plug the device end into your Stick or Express, and plug the other end into the wall power adapter for your Express, or for your Stick, use either the wall power adapter or any available USB port on the TV. If you plug into the USB port on the TV and there is a red light on your device, that means that the USB port on the TV is not delivering enough electrical current to the device for it to operate properly, and therefore you must use the wall power adapter instead. 3) Video output. HDMI cables carry both High-Definition video, and multi-channel audio simultaneously. With this in mind... A) Roku TV – all connections are internal and done already. B) Roku Streaming Stick – the male is built right into the stick, plug it into any available HDMI port on the television. C) Roku Express – connect HDMI cable male connectors on both ends, one to the HDMI on the Roku, the other to any available HDMI port on the TV. 4) Video Selection – use the TV’s remote control and/or the buttons on the TV, to ensure that the port you have plugged the Roku device into (or, the Roku part of a Roku TV), is the port that the TV will use to put the video onto the screen. 5) Insert the batteries into your remote.(There is a symbol inside the battery compartment in the remote that indicates the correct polarity). 6) The Roku logo will appear on your screen. If you do not get it then please check a) Is your player plugged into an electricity socket correctly? B) Double check that your TV is programmed for the same input of the HDMI cable and ensure that the cable is connected firmly on both ends of the player and TV. 7) Pair your remote a) To pair your remote open the battery door b) Find the button at the end and press for 3 seconds while aiming at the player, for Express and TV. For the Stick, because the stick will most often be behind the TV, such that the beam of invisible infra-red light which is used by the regular remote to communicate commands to the device, would not reach the Stick – so the Stick uses a radio signal that does not require the remote to be aimed at the Stick. 8) After selecting your language, the player will show the names of all wireless networks that it is able to communicate with. Choose your wireless network and enter the password. A) Success will be indicated by a green symbol; b) Failure with a red X. In most cases the password was entered incorrectly. (Note: The Password is case sensitive) 9) Player will attempt to automatically download software updates (this will take several minutes and then it will be installed automatically) After that, the player will restart. Then, the player will show on the TV screen, the Roku activation code which will be used to link your player to your Roku.com/link account. For help contact www.roku.com/link or reach out to Roku customer help. Measure 124.5 x 124.5 x 21.6 mm size larger than the Express and Express+. It is the best of the Roku Products. It provides everything that Roku ultra provides USB and Micro-SD slots for viewing your Personal Photos and your videos along with.MP4 playback. It also provides Dolby digital audio effect using HDMI or optical output. It also provides night listening mode. It remote supports private listening using headphone. The remote comes with the ability to connect the head phone. It comes with lost remote locator. This feature allows you to press a button in the box and this helps you locate the remote with an alert from the remote. It remote provides gaming buttons and voice search option this option is available in other devices only through the apps. It uses the RF technology instead of the IR blast. This means that the remote can be used even if the box is not in site. Roku Premiere+: Measure 124.5 x 124.5 x 21.6 mm size larger than the Express and Express+ Roku Premier+ is the one of the Roku top of the line models. It supports both Ethernet cable and dual band WiFi connectivity. It also provides Micro-SD card slots for viewing video and photos in your television. It is faster than Roku 1 which is the older model. Night listening mode available for this model. It is provides private listening option(The remote has the audio output jack. Headphones can be used in it for private listening) Roku Premiere+ Remote uses RF technology (The Box can be out of site and the remote can still be used). What does Roku provide as a streaming device? • It supports full 1080p HD videos and movies. • It provides a wide array of channels and TV shows • Remote control which includes settings and options • Streams through your wired or wireless network • Features a user friendly mobile app. • Headphones for private listening • Night listening mode (reduces loud noise and increases soft sounds) • Many different models such as- Roku (1-4), Roku Ultra, Roku premiere, Roku premiere+, Roku express, Roku express+ When using this device it is imperative to have high speed internet or your content quality may suffer. Roku is an electronic streaming device which enables you to stream your favorite movies, TV channels and shows to your TV via the internet. Even though most people know how to setup and activate their device, others face a bit of difficulty with the entire process.The problem that most users stumble upon relates to the www.roku.com/link during Roku Setup. In this site we are providing you with detailed information pertaining to your device on how to activate the device in roku.com/link website and will make your experience with Roku the best that it can be. Before we get into the details on how to setup and activate roku streaming player you need to have a thorough understanding of this device. Given above is the information relating to the this device and its setup. Roku offers a wide array of channels including both paid and free channels.It provides users with a HD video quality and uninterrupted streaming. The great thing about this device is that it is just a fraction of the cost when compared to going out and watching movies in theaters. You can sit back, relax and enjoy high quality entertainment from the comfort of your couch by activating this device at roku.com link. For more on this product check roku.com/link. Rokuactivationcode.com is an independent website that provides information for Roku streaming player issues. The website does not have specific association with “Roku” or its services. All information and images furnished on this website are for informational purpose only. We do not sell products or services of Roku in any form. We do not provide any warranty or services associated with the manufacturer. You should approach the manufacturer for the same. Users are advised to review our privacy policy before using our website. Restart your iPhone. Once finished with the online activation prompts, hold down the Sleep/Wake button until you see 'slide to power off' on your screen, then slide the power button to the right. Wait 5 minutes and then press and hold the Sleep/Wake button until you see the Apple logo. Your iPhone should be activated on the AT&T network. • If you could not complete the activation online, you will need to call AT&T's customer support or visit an AT&T store to talk with an AT&T representative to finish activating your iPhone. ![]() ![]() I must state from the beginning that this article is not about cracking activation engine because we don't want to break our Windows EULA, do we? This article tries to show you ways to bypass Windows XP product activation for those emergency situations. ![]() I will explain in details below. Let's suppose that you have a licensed copy of an Windows XP but lately you have installed-activated/uninstalled it for several times. At some point the Microsoft Activation Server just get bored and says 'OK, if you want me to activate your license then please pick up the phone and call me!' Serial key for Microsoft Office 2002 XP can be found and viewed here. We have the largest serial numbers data base. Microsoft office 2007 free full version microsoft office excel 2007 in business student resource dvd microsoft office 2007 reader microsoft office accounting professional 2007 microsoft office 2003 standard microsoft office 2003 software download free upgrade from office 2003 to office 2007 office 2007 enterprise key. I have a Microsoft Office XP Professional with Publisher Version 2002. Recently, had to re-install my Windows 7 64bit system and can't activate. What if you get bored (or you are just lazy) to call Microsoft and to justify yourself and to ask them 'Please, can you activate the copy that I bought legally? Yes, I have an invoice, in fact I have 10 invoices because it happens that I bought more copies than I'm using right now. No, I'm not a software theft, I cross my heart and hope to die!' Well, in that situation (let me make myself clear: when you both have the legal right to use that piece of software and you don't break the EULA) you could just try to exploit one of the Windows XP weaknesses. In fact you could try to exploit more than one, I'm sure about that (someone might think that I did it in the past; maybe they're right). You could find yourself in one of the following situations: • the 30 days has expired so you cannot access the Desktop anymore • you are within those 30 days time limit but you want to get rid of this issue Your 30 days has expired So you've got a message like the one below. Let's activate Windows - click WinKey+u By pressing simultaneous ' key' and 'u' (WinKey+u) you will open a window called 'Microsoft narrator' where you can click on some hyperlink called 'Microsoft web site' which in turn will open your default web browser (hopefully IE otherwise it works but with one more step; we get to this soon). Note: if by pressing +u it opens another window named 'Narrator' then, in order to get the 'Microsoft narrator' window, you have to right-click that window's title-bar and to choose 'About narrator' pop-up menu. So the ' narrator' window should look like this. Click the 'Microsoft Web site' link At this point the idea is to get the IE browser opened because the browser has 'an issue' that we are going to exploit it. In case that your default browser is /Chrome/Opera/etc we should do some extra steps in order to open your IE browser because finally the IE is the one we are going to hack. If your browser is just IE then skip the steps below and go to the 'IE browser opened'. Non-IE browser opened • enter 'C:' in your browser address bar; your browser should show the content of C: directory • navigate to the C:WindowsSystem32 directory then click 'taskmgr.exe' to download it; after it have downloaded just run that application (taskmgr.exe) • on choose File->Run then enter 'iexplore.exe' and hit OK; that will open your IE browser; finally you can use it (see below) IE browser opened In the address bar enter 'C:' then hit OK. If you are not using IE8 then that command should exploit a weakness of IE7 (or earlier) which in turn will 'crash the Windows' in that way that it will load the Desktop, the task bar, everything. Note: for some reasons keeps locking itself every 30-60 seconds so you won't be able to see the Desktop nor the task bar. If that is happening just repeat the step mentioned at the paragraph above (enter 'C:' in IE browser URL bar). Hacking is not always an easy job, isn't it? So, you have gained a time frame for ~30-60 seconds of fully functional system, period when, hopefully, you will be able to launch whatever program you want even if ~30-60 seconds later the Windows will lock it again (your application is already up an running so you are happy; Windows has closed its Desktop, he think it's clever, it's happy too; everybody is happy now, right?).: • I've seen that if you keep that ' window opened, then the Windows Desktop doesn't lock automatically after those ~30-60s. So for example I have had the IE opened and it has remained opened for an undefined period of time, but when I closed (chose OK button) the 'Window Product Activation' window then the Windows automatically logged me off so I had to begin the whole process from the beginning. I think it's good to know this 'tips' upfront. • If you start your in 'Safe mode' then the Windows Product Activation does not appear any more (regarding the safe-mode). • Some interesting info ( before check ). This trick just helps you to use your Windows copy in these emergency situations; I would not recommend anyone working like this on the daily basis because it could just prove to be a nightmare. You are within those 30 days time limit In this situation you are reminded (frequently enough) that you have only 30 (or less) days left for activation. The trick to bypass Windows XP product activation is the simplest and the most effective one. Activation reminder - 30 days left • open (Start->Run then enter regedit and push OK button) • open the registry key at the location HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWPAEvents • edit the OOBETimer key value and set its value to 'ff d5 71 d6 8b 6a 8d 6f d5 33 93 fd' • right-click on the same key WPAEvents and select 'Permissions' • select SYSTEM group/user and check all DENY options (we won't allow XP to mess with us anymore, in fact we deny it firmly:o) • click Advanced button then uncheck 'Inherit from parent the permission.' , press OK, when prompted at next step just answer with 'Copy' • in 'Permission entries' select the SYSTEM then choose 'Edit.' ; check all the 'Deny' permissions the OK+Apply It should not ask you anymore for software activation. In fact you could run Start->All Programs -> Activate Windows and you should get an response message like 'Windows is already activated'. If not working then just try again, maybe you have missed something on the way. If you are interested on /7 license activation you could read also. [!] WARNING [!] I would not recommend to anyone to try this procedure in order to gain the access to use an unlicensed copy of. In fact, when dealing with licensed software (like Windows), I would strongly recommend you to contact your software provider to ask it if you are allowed to do something like that or not. I wrote this article only for myself for research/educational purposes so that in case of emergency to be able to rescue my licensed system. When I have refereed the pronoun 'you' or 'we' I meant 'I'. Now, if you think that this article was interesting don't forget to rate it. It shows me that you care and thus I will continue write about these things. • J I bought a second hand Windows XP to dual boot on my mac computer. I would love to buy a brand new copy but of course it is far too old. It installed and worked fine. The product key worked during installation. However it won't let me activate it and now it says I need to activate it in 2 days to keep using it. This is despite having followed your methods above. All I can think is I accidentally left the computer connected to the internet and it did an auto update or something. It is really frustrating that I payed for a copy of windows xp and now it has stopped working and I lost all my installed programs. I can't get windows 7 or 8 as the programs I want to run won't work and I don't even know if windows 7 or 8 would work well on my mac. Any help would be much appreciated. • Ana Hi Eugen. Thank you for the information. I tried your method before the 30 days were up. The only thing that was unclear was the part with 'edit the OOBETimer key value and set its value to 'ff d5 71 d6 8b 6a 8d 6f d5 33 93 fd' The existing value had 2 lines with 0000 in front. I deleted everything and I was left with a line of 0000. While imputing the new value, it started generated numbers that I could not delete. I inputed the value you mentioned and clicked saved. And continued to the next steps, without a problem After restart, the windows activation message prompted me again to activated. What do I do now? Wait for the 30 days to be over and see if it works? I see you confirmed this in a message above, but can I do something to verify that it won't block access to my windows in 2 days when activation period expires? • Post author That screen is divided in three columns: - the 1st is read-only and is automatically calculated by Windows - the 2nd is where you can input values in format - the 3rd is the ASCII representation of those hexadecimal values (it may be manually edited although not recommended) So just ignore the columns in the left and just enter the correct values into the 2nd column, as described above. I hope that you also have set the permission to that registry key (namely WPAEvents) as described in the article, otherwise XP will still prompt you with that alert message. By setting the permissions as described in the article we don't allow Windows to control/alter that key anymore so it will be unable to protect itself. Why do you bother using Windows anyway? Linux is free and believe me, it's faster, need fewer resources, and all the software you need it's usually also free. If you are novice then start with Ubuntu Linux. It's a 'next->next.->finish' installation, it auto-updates automatically (just like Windows) and ships with many applications by default (although you will be able later to install tons of whatever apps you need). • Seth Hi Eugen -- I used your procedure with 28 days left on a fresh re-install of my totally legal XP-Pro-SP3 32-bit OS as a brute-force solution to frequent blue-screens. Microsoft is not activating XP at all these days, though I was able to accomplish it online just a couple of months ago. I use XP on this old-but-good PC as a simple server for my old-but-good printer and scanner, and as a music server (juke box ? to my old-but-good vintage stereo system. As for me, I'm just old! I use Win 7 - 10 64bit on a newer machine for everything else, and Office Pro etc., so Microsoft is still getting its pound of flesh from me. Back to activation and not being adept at working with the registry, I ran into the same issues/questions as 'Ana' above. Your explanation to her ultimately clarified my own procedure, although your terms like 'That screen is divided into 3 columns...' Left me uncertain as to what screen and how to access it. It would have been helpful to lead me by the hand to right-click on 'OOBETimer' and so on. Respecting the power of the registry, I took my time and slowly proceeded to follow what I inferred to be your intent. However, there were various differences in the details all along the way. For instance, at WPAEvents - Permissions - Advanced, TWO 'SYSTEM ' lines appeared, the original one as well as a new one I just apparently created by the access denials. I grabbed myself by the hoo-hoos and deleted the original, pre-denial line. Somewhat to my surprise and definitely to my satisfaction, it works so far, in reporting that it is activated. I'll see what happens in 28 days to seal the deal. Now I can use this old PC as preferred, again. I did take note of your enthusiasm for Linux. I've intended to learn about it since I'm a blank slate now. My really, really old-but-good PC would be a great test bed for this well-regarded free alternative OS, and I think I'll go for it. Thanks very much for your contributions to the horde of IT-challenged enthusiasts like moi! • Derrick Richards Hi, been trying to log on for 3 days, get activation screen, click yes, brings up another screen, click yes again, says I am already activated. So, I spent the last 3 days trying to fix this problem and nothing worked. So, I called up a buddy at Microsoft finally yesterday, and he told me Microsoft is well aware of this snag and has been for a decade. There is no way to get around it, he said, and TBH, the above op's post didn't work at all. I think why a few people got away with it is because they were accessing the registry stuff etc for the first time. Once you have tried to get around it, there is a builtin blockage, from what I have been told, and final note, Microsoft doesn't work with XP anymore, so that is their escape policy, my 4 cents, DR. • Iand Me Thanks Eugen I've reinstalled XP Pro and tonight applied the regedit method: key icon now gone. Crossing fingers! ☺ Here's a weird one back at ya. Previous installation was done over win 98 and I never had a problem. This install has led to frequent Bad Memory Pool BSOD. What stops that from happening is to have the XP (OEM) install disk in CD drive. Could it be the lack of floppy as in your article I recently glanced? I was able to install several times without a floppy—trying various methods for overcoming BMP BSOD. Time for me to run through a few reboots and see if the key icon reappears. You'll find product key (of OEM faik) if you look at bottom of XPOEMCD i386 data6.cab unattend.txt. • Post author I have used Windows for decades (literally). Started with Windows 3.x (probably the most people don't know what it is) then '95. As far as I know BSOD was always related to hardware-software conflicts (what you call Bad Memory I would call bad memory driver or just bad kernel, thus BSOD). Probably with older version of Windows using a non genuine license key (like those randomly generated but still valid as keys) it triggers an software exception that is unintentionally handled,which for you as end user will look like BSOD. The lack of floppy should never trigger such error. It will only be a pain in the ass if you have to install the Windows on a SCSI/RAID system (which means you have to have floppy drive; if you don't then you can't install, unless you were lucky enough to ). The BSOD problem it's mostly generated by two things: bad drivers OR bad hardware OR Windows just found out that somehow you managed to hack it and it generates a software exception. When the cause of BSOD is the latest then I suggest you reinstall the Windows (just take it easy, follow each step as described, don't hurry because the order of steps matter). Why are you still using Windows XP anyway? Nowadays you can much user-friendly and of course, free (no licensing whatsoever). • Iand Me I also have used used MS Windows OS for decades. On my shelf of old software I see Win 3.0 along with multiple boxes of other DOS software. I began learning programming when Gates and crew were also still in school. I didn't stay in the art except as a hobbyist. On the more recent OS shelf I see Win 95, 98, 98SE, W2K pro, XP Pro and Win 7 - all in official MS packages: CD, manual, etc. And here are 3 versions of the Posix based Linux and beside these sits two versions of early BeOS. Here's VB and C++ from MS—ALL LEGITIMATE! How many times have you enjoyed COMDEX? Put your paranoia back in your pocket. I had gone through multiple cycles of install and was still going against the problem. Now that problem is solved, XP activated, No CD required. Next steps kept to myself. Did you not not notice the sideways shot I made in my side topic comment? All I really wanted was a way to temporarily shoot down the annoying nag. Back to reading one of my hundreds of books, not the Linux command manual next to SQL manual and a pile of other software manuals—you do know that an OS is software right? Loop de loop. • Tyler Thanks for the tutorial. I have been trying to run a copy of windows XP on a Virtual Machine for a little while, and no matter what I tried it wasn't recognizing my product key, and I couldn't get it to activate at all. I followed your tutorial, and it seems to have worked with one minor glitch. Whenever I log on to the virtual Machine, it still brings me to the activation screen, but the first screen that pops up says 'This copy of Windows is already active, Click OK to exit', so I click OK, and it promptly logs me off. Any suggestions? • Smoke Thanks for this. As you can tell, XP is sooo not supported anymore, but I keep it for the Elder Scrolls series, Dawn of War series, Baldur's Gate and Icewind Dale series, you get the picture. (I also still have a DOS computer and a 98se beta computer. ? ) I knew there was a regedit activation process, but forgot what key to mod. I have looked everywhere, and I have finally found it again. Needless to say, not only am I saving this this time, but I am also printing out several copies for my files, to hang on the wall, and I'll laminate one and use it for a mouse pad. Thanks again. • Ken Thanks from me as well, just trying to keep just one of a number of computers in the house and office running, this one is my old business machine that I am just using for some storage and access to my old accounting software. I get bothered by Microsoft and their on going protection of this old software. This issue just appeared one day, I have not changed anything of note in the last year or so, but this just cropped up one day. I have licenses on every copy on all my machines, including two new ones, After spending over and over, it's painful losing valuable time fixing these issues. Hopefully this problem is permanently sorted now Cheers. • Gogu Motociclistu start narrator (windowskey - U) select the link where it says 'microsoft web page' it will start internet explorer - write the address 'c: windows explorer.exe' click on start - run - regedit remove everything related to oobe and wpaevents, all keys restart windows, boot with hirens boot cd to access drive C go to c: windows system32 oobe, replace msoobe.exe with c: windows explorer.exe restart windows xp sometimes it will prompt you for 30 days activation. When click on the prompt, an error message will say there's no such /a path. This works if you make significant hardware changes (a new motherboard) on the same windows xp system. Voila, no more trial activation. • Phil P I recently installed an old, entirely legal copy of Windows XP in a virtual machine, and it refused to activate via the internet, so I tried the registry hack described above. As others here have said, it only prevents the activation prompt at start-up without actually activating Windows. After 30 days, it still stopped working. I used telephone activation in the end, which wasn't as painful as I expected it to be. Out of curiosity, I thought I'd test the hack more thoroughly. My Windows installation disc is a Service Pack 1 version, so I decided to make multiple installations (5 of them): XP SP1 with no updates, XP SP2, XP SP3, and XP SP3 with all automatic Windows Updates (the ones that happen in the background when you enable automatic updates), and finally XP SP3 with every possible update, including optional ones: notably Windows Genuine Advantage. I applied the hack to each of these installations (making absolutely sure I followed each step), and left them unused for 30 days. They *all* stopped working after that 30 day period. If this hack ever worked (which I doubt), it must have been patched in Service Pack 1. • Phil P You said in a reply above (Sep 15, 2015) that you tried this a long time ago and don't remember all the details, but can you remember whether your version of XP was earlier than the Service Pack 1 release? Did it definitely continue to work for you after 30 days? Please don't think that I don't believe you ? - it's just that I've seen this hack posted in various places on the internet, and I suspect that a lot of the people who claim that it works haven't waited for the full 30 days, and just didn't bother to return and retract their claims after it stopped working. My installation disc is for XP Home Edition, version 2002. To anyone else who reads this reply and tries the registry hack: I'm sure it would be useful to others if you could say which version of XP you have, and ensure that you wait for the full 30 days before deciding that it works. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2018
Categories |